Click image to view full size image
Highly TDS seawater RO desalination plant for potable water production 2000m3/day
1. Operation Specifications:
| Feed TDS | 10,000-42000 ppm |
| Electric control | Programmable logic controller | PLC |
| Feed temperature | 2-40 |
| Feed PH | 3-11 |
| Operation pressure | 600-1000 psi / 4-6.5 Mpa |
| Desalination rate | >98% |
| Permeate water salinaty | <500 mg/L |
| Capacity | 500-750 m3/day |
| Electricity | 380V/50HZ/3PH, other volt please specify upon order |
| Feed water pressure | 40-80 psi / 0.1-0.3Mpa |
2. Description:
For continuous or heavy-duty service in marine applications on and off shore, we manufacture
a full line of designed seawater desalination systems.
Seawater Reverse Osmosis (SWRO) is a reverse osmosis desalination membrane process that has been
commercially used since the early 1970s. The typical single pass SWRO system consists of the following
components:
- Intake: well or open water
- Pre-treatment: Filtration and chemical dosing
- High-pressure pump: to achieve the needed pressure
- Membrane assembly: to perform the desalination process
- PH adjustment: to adjust the alkalinity or acid level
- Disinfection: to prevent any bacterial or organic growth
- Experience in manufacture and supply hundreds of seawater desalination plants with feed water TDS up to 45,000 ppm.
3. Standard features:
