Click image to view full size image
High pressure pump Seawater RO Plant for seawater desalination 750 m3 / day
1. Operation Specifications:
| Feed TDS | 10,000-42000 ppm |
| Feed temperature | 2-40 |
| Feed PH | 3-11 |
| Operation pressure | 600-1000 psi / 4-6.5 Mpa |
| Desalination rate | >98% |
| Permeate water salinaty | <500 mg/L |
| Capacity | 500-750 m3/day |
| Electricity | 380V/50HZ/3PH, other volt please specify upon order |
| Power | 95 Kw |
| Tonnage electricity consumption | 3.5 Kwh/T |
| Feed water pressure | 40-80 psi / 0.1-0.3Mpa |
2. Description:
From water-makers to industrial sized Seawater Purification, we offer a full range of systems. Our units are manufactured to eliminate a large amount of salts and other minerals from seawater using RO. Our equipment does the filtration by employing a high-pressure pump to salty water forcing it through semi-porous membranes denying salts and other organics from flowing through.
Seawater Reverse Osmosis (SWRO) is a reverse osmosis desalination membrane process that has been commercially used since the early 1970s. The typical single pass SWRO system consists of the following components:
- Intake: well or open water
