Click image to view full size image
High TDS seawater RO plant for drinking water production 360m3/hr
1. Operation Specifications:
| Feed TDS | 10,000-42000 ppm |
| Feed temperature | 2-40 |
| Feed PH | 3-11 |
| Operation pressure | 600-1000 psi / 4-6.5 Mpa |
| Desalination rate | >98% |
| Permeate water salinaty | <500 mg/L |
| Capacity | 500-750 m3/day |
| Electricity | 380V/50HZ/3PH, other volt please specify upon order |
| Power | 95 Kw |
| Tonnage electricity consumption | 3.5 Kwh/T |
| Feed water pressure | 40-80 psi / 0.1-0.3Mpa |
2. Description:
From water-makers to industrial sized Seawater Purification, we offer a full range of systems. Our units are manufactured to eliminate a large amount of salts and other minerals from seawater using RO. Our equipment does the filtration by employing a high-pressure pump to salty water forcing it through semi-porous membranes denying salts and other organics from flowing through.
The membranes are only tasked to remove dissolved solids while dividing the feed water into purified water and rejected concentrated salts. The salts and other organics are thrown into the brine stream then flushed into a drain. At the end we have purified water that has 98% less
Industrial Heavy duty Seawater RO Plant With reverse osmosis filtration systems
